HANGZHOU KAIGE MEMBRANE TECHNOLOGY CO.,LTD.

Products > Membrane Bioreactor Purifier Module > Hollow Fiber Membrane Module(MBR) > Membrane Bioreactor Module For Water Treatment Plant
Membrane Bioreactor  Module  For Water Treatment Plant
Membrane Bioreactor  Module  For Water Treatment Plant Membrane Bioreactor  Module  For Water Treatment Plant Membrane Bioreactor  Module  For Water Treatment Plant Membrane Bioreactor  Module  For Water Treatment Plant
Product name : Membrane Bioreactor Module For Water Treatment Plant
Product No. : 2022525121944
←[Previous Product]              [Next Product]→
Online Inquiry         Email Us

  Details:
Membrane Bioreactor  Module  For Water Treatment Plant

One、 Reinforced PVDF composite hollow fiber membrane has the following characteristics:
1. Ultra-high strength
The Reinforced PVDF composite hollow fiber membrane, with its tensile strength and compressive strength much higher than the ordinary hollow fiber membrane due to its unique supporting layer membrane technology, is more vividly known as "continuous pulling membrane" because of its tensile strength of more than 50KG.
2. Good anti-pollution performance
The Reinforced  PVDF composite hollow fiber membrane has excellent anti-pollution performance due to its super-smooth surface characteristics and unique charge properties due to the adoption of PVDF alloy membrane as its filtration layer.
3. Very large flux
Reinforced PVDF composite hollow fiber membrane adopts relatively independent special supporting layer technology and PVDF alloy membrane filtration layer technology, and its special filter layer has a higher porosity structure, so that it has a very large water flux performance.
4. Good interception performance
The reinforced PVDF composite hollow fiber membrane USES PVDF alloy membrane as its filtration layer.
5. Good cleaning flux recovery
Reinforced PVDF composite hollow fiber membrane adopts PVDF alloy membrane as its filtration layer, and its special double cortical structure makes the pollutants can only stay on the outer surface of the membrane and not enter the mesh holes of the membrane, so it is very easy to clean and the cleaning flux is recovered well.
6, Reinforced PVDF composite membrane components can modular design, compact structure, small footprint, easy to use combination

TWO、Performance
 

 

 

 

Specification

Model

KG-MBR-6-Co-PVDF

KG-MBR-10-Co-PVDF

KG-MBR-16-Co-PVDF

Length

1020mm

1523mm

1523mm

Wideth

655mm

655mm

655mm

Waterinlet diameter

DN32

DN32

DN32

Outlet diameter

/DN32

/DN32

/DN32

Water Way

Pressure inside

/outside pressure

Pressure inside

/outside pressure

Pressure inside

/outside pressure

Area

6m2

10m2

16m2

Dry weight

4kg

6kg

9kg

Wet weight

6kg

10kg

16kg

 

 

 

The basic parameters

Shell material

ABS/UPVC

ABS/UPVC

ABS/UPVC

Material

PVDF

PVDF

PVDF

Pore size

0.1um

0.1um

0.1um

Hollow fiber diameter

1.6mm

1.6mm

1.6mm

Outlet diameter

2.4mm

2.4mm

2.4mm

NTU

≦1NTU

≦1NTU

≦1NTU

SDI

1mg/l

1mg/l

1mg/l

LEFE

3-5

3-5

3-5

 

 

 

 

 

 

Condition

Temperature tolerance range

1-40℃

1-40℃

1-40℃

PH range of tolerance

2-13

2-13

2-13

Flowrat

2.0-3.0m3/d

3.5-5.0m3/d

4.0-6.0m3/d

The largest transmembrane pressure difference

-0.03Mpa

-0.03Mpa

-0.03Mpa

The water way

Negative pressure suction

Negative pressure suction

Negative pressure suction

The maximum water pressure

8 minutes, stop 2 minutes

8 minutes, stop 2 minutes

8 minutes, stop 2 minutes

The maximum backwashing pressure

NACLO3

NACLO3

NACLO3

 Chemical cleaning cycle

6-12M

6-12M

6-12M

Chemical cleaning agents

Citric acidNAOH

Citric acidNAOH

Citric acidNAOH

1.All technical parameters in the table for the standard test under the condition of the factory test values.
2.Table middle water flow is refers to the products used in MBR technology (water temperature 25 ℃, pressure: 0.10 Mpa)


Three:  Membrane equipment Size

No

         Model

Membrane shell size

Flowrate

1

KGMO-MBRMD-12-Co-PVDF (single) 

1180*760*2000MM

2M3/H

2

KGMO-MBRMD-30-Co-PVDFsingle

2800*760*2000MM

5M3/H

3

KGMO-MBRMD-30-Co-PVDF *2 (double)

2800*760*2000MM

10M3/H

4

KGMO-MBRMD-60-Co-PVDF*5 (double)

2800*1200*2000MM

50M3/H

5

KGMO-MBRMD-60-Co-PVDF *10套(double)

2800*1200*2000MM

100M3/H


Application:

For the difficult degradable industrial wastewater:

1, chemical wastewater, pharmaceutical wastewater, coking wastewater, waste leachate
2, high concentration organic wastewater: food processing wastewater, aquaculture wastewater
3, general wastewater: life waste water, urban sewage water
4, sewage treatment facilities upgrade re-election.



  Related Products :

Membrane Bioreactor  Module for water treatment
Membrane Bioreactor Module for water treatment

Membrane Bioreactor  KH-MBR-15-Co-PVDF
Membrane Bioreactor KH-MBR-15-Co-PVDF

Membrane Bioreactor  KG-MBR-6-Co-PVDF
Membrane Bioreactor KG-MBR-6-Co-PVDF

Hollow Fiber Membrane Bioreactor  Module for water treatment
Hollow Fiber Membrane Bioreactor Module for water treatment

Membrane Bioreactor  Module Used Water Treatment Machinary
Membrane Bioreactor Module Used Water Treatment Machinary

Online service

MSN: wangjinghua2006@hotmail.com Skype: alice.wang100679 346786164 admin@mbrsupplier.com,alice.wang1006@gmail.com